APTRANSCO AE Syllabus
Good news is here for all such candidates who were applied
for Assistant Engineer posts nil vacancies. Transmission Corporation
of Andhra
Pradesh Limited (APTRANSCO) is going to hire the applicants by commencing the
exam at several locations in the state. Applicants need to stay on this page for
APTRANSCO AE Syllabus with PDF
Details of Assistant Engineer Exam Pattern which is pasted in the same article.
All the friends are advised to preparation for AE Exam because compititon is
not so easy to beat without dedication.
After apply for such reputed post all the participants need
to check the details of APTRANSCO Assistant
Engineer Syllabus and concentrate only on preparation. Transmission
Corporation of Andhra Pradesh Limited time to time recruits the candidates by
declaring the APTRANSCO Recruitment notifications. After beat the scheduled
test for Assistant Engineer openings job grabbers will appoint for better
salary. To come true the dream of government job appliers must have highlights
connected with Syllabus & Exam Pattern. All the best to appliers for the
success in the test!!
APTRANSCO AE Syllabus Overview
Assistant Engineer Exam consist the following topics and its
complete syllabus as provided below, take a look…
- Electrical
- Civil
APTRANSCO AE
Electrical Syllabus Full Details
APTRANSCO Assistant Engineer Electrical Syllabus contains
the following topics as described below:
- Electric Circuits
- Electrical Machines
- Power Systems
- Utilization & Control Systems
- Measurements
- Analog and Digital Electronics
- Power Electronics and Drives
Electric Circuits Syllabus:
S. No.
|
Topics To Be Covered
|
1
|
Network graph
KCL
KVL
Node and mesh analysis
star/ delta transformation
|
2
|
Electromagnetic Induction
|
3
|
Mutual Induction
|
4
|
Ac Fundamentals
|
5
|
Harmonics
Transient Response Of Dc And Ac Networks
|
6
|
Sinusoidal Steady-State Analysis
Resonance
Ideal Current And Voltage Sources
Thevenin’s
Norton’s, Superposition And Maximum Power Transfer Theorems,
Two-Port Networks
Three Phase Circuits
Power Measurement
|
Electrical Machines Syllabus:
- Single phase transformer - equivalent circuit, phasor diagram, tests, regulation and efficiency
- Three Phase Transformers - Connections, Parallel Operation
- Auto-Transformer
- DC machines - types, windings, generator/ motor characteristics, armature reaction and commutation, starting and speed control of motors
- Three phase induction motors - principles, types, performance characteristics, starting and speed control
- Single phase induction motors
- Synchronous machines - performance, regulation and parallel operation of generators, motor starting, characteristics and applications.
Power Systems
Syllabus
S. No.
|
Topics To Be Covered
|
1
|
Basic Power Generation Concepts
|
2
|
Transmission Line Models And Performance
|
3
|
Underground Cable, String Insulators
|
4
|
Corona
|
5
|
Distribution Systems
|
6
|
Per-Unit Quantities
|
7
|
Bus Impedance And Admittance Matrices
|
8
|
Load Flow
|
9
|
Voltage Control
|
10
|
Power Factor Correction
|
11
|
Economic Operation
|
12
|
Symmetrical Components
|
13
|
Fault Analysis
|
14
|
Principles Of Over-Current, Differential And Distance Protection
|
15
|
Protection Of Alternator, Transformer, Transmission Lines Neutral
Earthing, Solid State Relays And Digital Protection
|
16
|
Circuit Breakers
|
17
|
System Stability Concepts, Swing Curves And Equal Area Criterion
|
Utilization &
Control Systems Syllabus
- Principles Of Feedback
- Transfer Function
- Block Diagrams
- Steady-State Errors
- Routh And Nyquist Techniques
- Bode Plots
- Root Loc, Lag, Lead And Lead-Lag Compensation
- Heating - Resistance, Induction, Dielectric
- Welding – Spot, Seam And Butt
- Electric Traction – Speed-Time Curves, Tractive Effort
Electrical
Measurements Syllabus
S. No.
|
Topics To Be Covered
|
1
|
Bridges and potentiometers
|
2
|
PMMC, moving iron, dynamometer and induction type instruments
|
3
|
Measurement Of Voltage, Current, Power, Energy And Power Factor
|
4
|
Digital Voltmeters And Multi-Meters
|
5
|
Phase, Time And Frequency Measurement
|
6
|
Q-Meters
|
7
|
Oscilloscopes
|
Analog and Digital
Electronics Syllabus:
- Characteristics of diodes, BJT, FET
- Amplifiers - biasing, equivalent circuit and frequency response
- Oscillators and feedback amplifiers
- Combinational and sequential logic circuits
- Multiplexer
- Schmitt trigger
- A/D and D/A converters
- 8-bit microprocessor basics, architecture, programming and interfacing
Power Electronics
and Drives Syllabus:
S. No.
|
Topics To Be Covered
|
1
|
Semiconductor power diodes, transistors, thyristors, triacs, GTOs,
MOSFETs
IGBTs - static characteristics and principles of operation
|
2
|
Triggering Circuits
|
3
|
Phase Control Rectifiers
|
4
|
Bridge Converters - Fully Controlled And Half Controlled
|
5
|
Principles Of Choppers And Inverters
|
6
|
Basic Concepts Of Adjustable Speed Dc And Ac Drives.
|
APTRANSCO AE Civil Syllabus: APTRANSCO Assistant
Engineer Civil Syllabus contains the following topics as shown below:
- Strength of Materials
- Reinforced Concrete
- Steel Structures
- Fluid Mechanics & Machinery
- Soil Mechanics
Strength of
Materials Syllabus:
S. No.
|
Topics To Be Covered
|
1
|
Simple Stresses And Strains
|
2
|
Hook’s Law
|
3
|
|
4
|
|
5
|
|
Reinforced
Concrete Syllabus:
- Basic Reinforcing Materials, Tests On Cement And Aggregates.
- Structural Concrete And Its Grades, Workability Tests And Concrete Mix Design.
- Singly And Doubly Reinforced Beams, Working Stress Design Of Rectangular And Flanged Beams
- Shear, Bond, Development Length And Torsion In Beams, One-Way And Two-Way Slabs, Axially And Eccentrically Loaded Columns, Isolated And Combined Footings.
- Basic Concepts Of Limit State Design And Its Applications To The Design Of Beams, Slabs And Columns.
Steel Structures
Syllabus:
S. No.
|
Topics To Be Covered
|
1
|
Grades Of Steels, Design Of Simple And Compound Beams, Riveted And
Welded Joints, Riveted
|
2
|
Welded Connections’-Eccentric Framed And Seated, Simple And Compound
Columns, Slab
|
3
|
Gusseted Bases, Grillage Foundations, Roof Trusses, Plastic Analysis
– Plastic Bending Of Beams, Shape Factor, Plastic Analysis Theorems
|
4
|
Analysis Of Fixed, Propped Cantilever Beams By Static And Kinematics
Methods
|
Fluid Mechanics
& Machinery Syllabus:
- Fluid properties, pressure measurements, manometers, forces on plane and curved surfaces, center of pressure, principle of buoyancy, stability of floating and submerged bodies, metacentre, Kinematics of fluid flow, equation of continuity.
- Euler’s and Bernoulli’s equations, Impulse-momentum, flow measuring device s – orifices and mouth pieces, notches and weirs, flow through pipes, open channel flow, impact of jets – stationery and moving vanes (flat and curved), radial vanes, hydraulic turbines, pumps and machinery.
Soil Mechanic
Syllabus:
S. No.
|
Topics To Be Covered
|
1
|
Physical Properties Of Soils, Classification And
|
2
|
Identification, Permeability, Capillarity, Seepage, Compaction, Shear
Strength, Earth Pressure, Slope Stability
|
3
|
Foundation Engineering : Stress Distribution In Soils, Bearing
Capacity, Settlement Analysis, Pile Foundation, Coffer Dams, Caissons,
Dewatering, Bracing For Excavations, Site Investigations, New Mark Charts,
Machine Foundation
|
APTRANSCO Assistant Engineer Exam Pattern:
Section (A): Questions on core academic curriculum of
respective discipline - (70 marks).
Section (B): Questions on analytical aptitude – (30
marks)
Note: Dear
candidates you can go to the below link for other details of syllabus:
Take a Look on Below Table
0 comments:
Post a Comment